QRB3火焰探測器
品牌：SIEMENS（西門子）
產地：德國
Photoresistive flame detectors for use with Landis & Staefa burner controls, for the supervision of oil flames in the visible light spectrum. The flame detectors are used primarily in connection with burner controls for small burners.
-
With this type of flame supervision, the radiation of oil flames in the visible light spectrum is used for generating the flame signal.
-
The light-sensitive element is a photoresistor.
-
When there is no light, the detector′s resistance is in the MΩrange.
-
The resistance drops as the intensity of illumination increases (kΩrange).
-
In contrast to the selenium photocell of the RAR... detectors, glowing firebrick in the combustion chamber can be detected.
|
主要參數
|
|
保護等級
|
IP40
|
|
當連接至LOA.../LAL...時，電纜長度
|
1.5m最大
|
|
連接電纜
|
2*0.75mm2,5.1mm直徑
|
|
重量
|
20...35g
|
|
|
|
環境條件
|
|
運輸環境
|
IEC 60 721-3-2
|
|
內部條件
|
class 2K2
|
|
溫度范圍
|
-20...+60oC
|
|
濕度
|
<95%
|
|
運行環境
|
IEC 60 721-3-3
|
|
內部條件
|
class 3K5
|
|
機械條件
|
class 3M2
|
|
溫度范圍
|
-20...+60oC
|
|
濕度
|
<95%
|
|
不得進水
|
|
|
此型號主要應用于意大利BALTUR百得燃油燃燒器上，大于30萬大卡以上使用。
